Inter-Tel CS-5200 Manuale Utente

System Features

INTER-TEL

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005

Page 228

Intercom, Speed Dial, and Feature Code Directories

Keypad buttons are used to enter the desired English and or Spanish

or Japanese (Katakana)

letters, numbers, and punctuation. Refer to the chart on the next page. Only digital display end-
points can be used for viewing Japanese prompts.

The station user can switch between numeric

and alphanumeric modes. (Numeric mode =

button unlit; alphanumeric mode =

button lit.) In alphanumeric mode, the number of times a button is pressed determines

which character is entered. For example, 77776444844 would enter “SMITH.” When adjoining
characters are located under the same button, press the

button once to advance to the

next character. For example, 5666

66337777 would enter “JONES.” The letters corre-

spond to the letters printed on the dialpad buttons.

The intercom directory is automatically updated whenever usernames and/or extension number
information is reprogrammed. The outside directory is updated whenever a System Speed Dial
number or name is reprogrammed.

Only Administrator phones can view administrator feature codes using the directory. If the
Diagnostics Mode feature is enabled, the diagnostic feature codes can also be viewed.

Use the following table as a guide for your entries using the keypad buttons.

Table 30.

Using the Dialpad to Locate Extension Numbers in the System Directory.

*The Japanese characters are only available if the Multilingual feature is enabled and Japanese
is installed as the secondary language.

NOTE

The Message Lamp on Model 8500, 8520, and 8560 phones occupies the upper
right-hand corner of the endpoint. If programmed for the Message feature, the
lamp lights in alphanumeric mode.

NUMBER OF TIMES BUTTON IS PRESSED

BUTTON

ENGLISH/SPANISH CHARACTERS

KATAKANA CHARACTERS

(

)

’

SHI

CHI

TSU

tsu

long

MSG

FWD