Inter-Tel CS-5200 Manuale Utente

Page  34

System Programming

2.) The display shows VERIFY PASSWORD. Enter the password exactly as you

did in the step above, followed by 

. The display returns to the ENTER

SYSTEM OPTION prompt. (If you hear reorder tones and see an error mes-
sage, the passwords did not match and you must start over at the CHANGE
PASSWORD prompt.)

c.

Reminder Messages: This option allows you to program the reminder messages
used by the endpoints. To select it, press 

 or the 

 menu but-

ton. Then do the following:

1.) The display shows SELECT REMINDER MSG #. Enter a message number or

scroll to the desired message. (To scroll to the message, press the Volume but-
ton or the 

 plus 

 and 

 menu buttons.)

2.) When the display shows the desired message, enter the new message as

described on 

.

3.) Press  

or 

 to save the new message. The display shows DATA-

BASE UPDATED and then returns to the SELECT REMINDER MSG
prompt. (Or, to cancel your entry, press 

 or 

. The display shows

NO UPDATE PERFORMED.)

4.) To program another message, scroll to the desired message and repeat these

steps.

5.) Press 

 again to exit to the ENTER SYSTEM OPTION prompt.

d.

Station Extensions: This option allows you to assign new extension numbers to
stations/endpoints/phones. To select it, press 

 or the 

 menu

button.

If programming a phone:

1.) Press 

 

or 

 The display shows ENTER ENDPOINT EXTEN-

SION. Enter the extension number of the phone to be programmed using one
of the following methods. If you enter an invalid extension number, you hear
reorder tones and must try again.

Enter a complete number:  Enter the extension number using your dialpad.
When a valid number is entered, the circuit information is displayed. Press 
again to continue.

Enter a partial number: Enter a partial extension number, then press 

, the

high end of the Volume button, or the 

 menu button. The display

shows the extension number, username, and circuit number of the phone that
most closely matches the partial extension number. Press 

 or 

 to

program the displayed phone, or scroll to another phone as described on the
following page.

Scroll through the numbers:  To scroll through the extension number list,
press the high end of the Volume button or the 

 menu button to scroll

forward, or press the low end of the Volume button or the 

 menu

button to scroll backward. When the desired extension number is displayed,
press  

or 

 to continue.

2.) The display shows CHANGE X <number> TO EXTENSION. Enter the new

extension number for the phone. If you enter an invalid number, you hear
reorder tones and must try again. If you entered an extension number that is
already assigned,  the display shows CONFLICTING EXTENSION and you
hear reorder tones. When the display returns to ENTER ENDPOINT EXTEN-
SION, you must start over and select a new extension number.