Gateway 920 Manuale Utente
68
Chapter 6: Troubleshooting
www.gateway.com
Error messages
These messages often indicate procedural errors such as typing an incorrect
keystroke or trying to save a file to a write-protected diskette. Some messages,
however, may indicate a problem that requires further troubleshooting.
keystroke or trying to save a file to a write-protected diskette. Some messages,
however, may indicate a problem that requires further troubleshooting.
Diskette drive 0 seek to track 0 failed
■
Restart your server, then press and hold F2 to open the BIOS Setup utility.
Make sure that the drive settings are correct.
Make sure that the drive settings are correct.
Error loading operating system
■
The master boot record may be corrupt. For troubleshooting information,
see
see
.
Hard disk controller failure
■
Make sure that the hard drive cable is connected securely.
■
Restart your server, then press and hold F2 to open the BIOS Setup utility.
Make sure that the correct drive type is selected.
Make sure that the correct drive type is selected.
Hard disk controller failure - press F1 to try reboot
■
The drive controller may be defective. Press F1 to try to restart the server.
For more information about running diagnostics on your hard drive, see
your operating system’s documentation.
For more information about running diagnostics on your hard drive, see
your operating system’s documentation.
■
See
.
Insert bootable media device
■
Make sure that the correct hard drive is set as the first bootable drive in
the Boot menu of the BIOS Setup utility. Restart your server, then press
and hold F2 to open the BIOS Setup utility.
the Boot menu of the BIOS Setup utility. Restart your server, then press
and hold F2 to open the BIOS Setup utility.
■
See
for a possible solution.
Invalid configuration information
■
Restart your server, then press and hold F2 to open the BIOS Setup utility.
Make sure that the settings are correct.
Make sure that the settings are correct.
■
Reset the BIOS. For more information, see