Lucent Technologies 555-233-115 Manuale Utente

Issue 1

April 2000

Multicarrier G2 Universal Module to R8r EPN 

5-34

Standard Reliability 

3. Behind control carrier A of EPN cabinet 2:

■

Install a lightwave transceiver on cable connector at slot 2A02.

Attenuators may be required for single mode fiber using a 
300A Lightwave Transceiver

■

Connect a fiber optic cable to the transceiver just installed.

■

Route the cable to the cable tray and down, out of the cabinet, 
through the cable manager to the PDS cross-connect facility.

■

Connect the fiber cable to the lightguide interconnect unit provided.

■

Carefully attach the fiber optic cable (with cable ties) to the wall of 
the cable tray at the built-in cable tie positions.

4. Behind control carrier A of EPN cabinet 3:

■

Install a lightwave transceiver on cable connector at slot 3A02.

Attenuators may be required for single mode fiber using a 
300A Lightwave Transceiver

■

Connect a fiber optic cable to the transceiver just installed.

■

Route the cable to the cable tray and down, out of the cabinet, 
through the cable manager to the PDS cross-connect facility.

■

Connect the fiber cable to the lightguide interconnect unit provided.

■

Carefully attach the fiber optic cable (with cable ties) to the wall of 
the cable tray at the built-in cable tie positions.

■

Coil up the surplus fiber cable and place it in the cable manager.