Manuali utente per Lucent Technologies 555-233-115

Manuale Utente (English)

Manuale Utente

Sommario

DEFINITY® Enterprise Communications Server Release 8.2 Upgrades and Additions for R8r
1
Contents
3
What’s New in Release 8.2r
7
- Features
  7
- Hardware
  9
- Tools
  11
- Commands, screens, and fields
  11
- Procedures
  11
- Upgrade tips
  13
- Cautions and warnings
  13
- Product names
  14
About This Book
15
1 Upgrading G3rV2, V3, V4 to R8r and Adding Memory
27
2 Upgrading R5r/R6r/R7r to R8r without Adding Memory
51
3 Upgrading R5si/R6si to R8r EPN and Adding Memory
73
4 G3vs with Intel 386 or Risc Processor to R8r
129
- Read This First
  130
  - Service Interruption
    130
  - Call Management System (CMS)
    130
  - Preventing Translation Errors
    130
  - Communication Between Equipment Rooms
    130
  - Usable Circuit Packs
    131
  - Contact Network Technicians
    131
  - Required Tools
    131
- Task Tables
  132
- Preliminary Procedures
  134
  - Software Upgrade
    134
    - Follow Routine Preventive Maintenance
      134
- Remove the Present System
  135
- Install the Release 8r Cabinets
  139
- Upgrade Completion
  144
  - Install Remaining Hardware and Administer the System
    144
  - Enable TTI
    144
  - Check Link Status
    144
  - Enable Scheduled Maintenance
    144
  - Resolve Alarms
    144
  - Enable Customer Options and Alarm Origination to INADS
    145
  - Save Translations
    146
  - Back Up Disk
    146
  - Return Replaced Equipment
    146
- DEFINITY AUDIX Power Procedures
  147
  - Power Down the AUDIX System
    147
  - Power Up the AUDIX System
    147
5 Multicarrier G2 Universal Module to R8r EPN
149
- Single-Mode Fiber Attenuators
  149
- Read This First
  150
  - Service Interruption
    150
  - Call Management System (CMS)
    150
  - Preventing Translation Errors
    150
  - Contact Network Technicians
    150
  - Communication Between Equipment Rooms
    150
  - Relocation of Port Circuit Packs
    151
  - Usable Circuit Packs
    151
  - Site Inspections
    151
  - Power and Ground
    152
  - DC Isolator
    152
  - Power-Failure Stations
    153
  - Software
    153
  - Alarm Connection
    154
  - Save Translations
    157
  - Make Source Tape for TRACS Report
    157
    - System Upgrades
      157
- Task Tables
  158
- Standard Reliability
  163
  - Required Hardware
    163
    - Required Tools
      164
  - Follow Routine Preventive Maintenance
    164
  - Label Cables
    164
  - Check Link Status
    165
  - Disable TTI
    165
  - Power Down G2 System
    165
  - Install Power-Failure Transfer Ground Wire
    165
  - Disconnect Cables
    166
  - Remove Circuit Packs from Module Control Carrier A
    166
  - Remove CURL from Module Control Carrier A
    166
  - Remove Module Control Carrier A
    167
    - Disconnect TDM/LAN Cables
      167
    - Remove Carrier Ground Straps
      169
  - Unpack and Inspect Expansion Control Carrier
    171
  - Install New Expansion Control Carrier A
    171
  - Install Circuit Packs
    174
  - Interconnect Port Networks
    174
  - For Two Fiber-Remoted Expansion Port Networks
    181
  - Verify Usable Circuit Pack Vintages
    183
  - Remove Power-Failure Ground Wire
    183
  - Boot the Release 8 System
    184
  - Set Daylight Savings Rules
    185
  - Set Date and Time
    186
  - Set Additional Administration
    188
  - Reconnect Cables to Upgraded EPN Cabinet
    188
  - Power Up the EPN Cabinets
    189
  - Retranslate Port Circuits
    189
  - Enable TTI
    189
  - Check Link Status
    189
  - Enable Scheduled Maintenance
    189
  - Resolve Alarms
    189
  - Enable Customer Options and Alarm Origination to INADS
    190
  - Save Translations
    190
  - Back Up Disk
    191
  - Return Replaced Equipment
    191
- High Reliability
  192
  - Required Hardware
    192
  - Required Tools
    193
  - Follow Routine Preventive Maintenance
    193
  - Label Cables
    193
  - Check Link Status
    194
  - Disable TTI
    194
  - Power Down G2 System
    194
  - Install Power-Failure Transfer Ground Wire
    194
  - Disconnect Cables
    195
  - Remove Circuit Packs from Module Control Carrier A
    195
  - Remove CURL from Module Control Carrier A
    195
  - Remove Module Control Carrier A
    195
  - Unpack and Inspect Expansion Control Carrier
    199
  - Install New Expansion Control Carrier A
    199
  - Install Circuit Packs
    203
  - Interconnect Port Networks — High Reliability
    203
  - Verify Usable Circuit Pack Vintages
    214
  - Remove Power-Failure Ground Wire
    214
  - Boot the Release 8 System
    215
  - Set Daylight Savings Rules
    215
  - Set Date and Time
    217
  - Set Additional Administration
    219
  - Reconnect Cables
    219
  - Power Up the EPN Cabinets
    220
  - Retranslate Port Circuits
    220
  - Enable TTI
    220
  - Check Link Status
    220
  - Enable Scheduled Maintenance
    220
  - Resolve Alarms
    221
  - Enable Customer Options and Alarm Origination to INADS
    221
  - Save Translations
    222
  - Back Up Disk
    222
  - Return Replaced Equipment
    222
- Critical Reliability
  223
  - Upgrade Cabinets
    223
    - Required Hardware
      223
    - Required Tools
      224
  - Follow Routine Preventive Maintenance
    224
  - Label Cables
    224
  - Check Link Status
    225
  - Disable TTI
    225
  - Power Down G2 System
    225
  - Install Power-Failure Transfer Ground Wire
    225
  - Disconnect Cables
    226
  - Remove Circuit Packs from Module Control Carriers A and B
    226
  - Remove CURL from Module Control Carrier A
    226
  - Remove Module Control Carriers A and B
    227
  - Prepare the New A and B Position Carriers
    231
  - Install the New A and B Position Carriers
    232
  - Test the CURL
    238
  - Install Circuit Packs
    238
  - Interconnect Port Networks — Critical Reliability
    239
  - Verify Usable Circuit Pack Vintages
    253
  - Remove Power-Failure Ground Strap
    254
  - Boot the Release 8 System
    254
  - Set Daylight Savings Rules
    255
  - Set Date and Time
    256
  - Set Additional Administration
    258
  - Close Upgraded EPN Cabinet and Reconnect Cables
    258
  - Power Up the EPN Cabinets
    259
  - Retranslate Port Circuits
    259
  - Enable TTI
    259
  - Check Link Status
    259
  - Enable Scheduled Maintenance
    259
  - Resolve Alarms
    260
  - Enable Customer Options and Alarm Origination
    260
  - Save Translations
    261
  - Back Up Disk
    261
  - Return Replaced Equipment
    261
6 Adding or Removing Cabinet Hardware
263
A Fiber Link Administration
411
- Administer Fiber Links
  411
  - Circuit Pack Form
    412
  - Administer Fiber Links on Simplex Systems
    413
    - T1 Installations Only
      414
    - E1 Installations Only
      414
    - All Installations
      414
  - Administer Fiber Links on Duplex Systems
    415
    - T1 Installations Only
      417
    - E1 Installations Only
      417
    - All Installations
      417
  - Fiber Link Administration Form
    418
    - Administration commands
      418
    - Form instructions
      420
B Troubleshooting an Upgrade
431
C Access Security Gateway
443
- Using the ASG Mobile
  444
Glossary and Abbreviations
445
- Numerics
  445
- A
  445
- B
  451
- C
  453
- D
  459
- E
  464
- F
  466
- G
  468
- H
  468
- I
  469
- K
  473
- L
  473
- M
  474
- N
  479
- O
  480
- P
  481
- Q
  485
- R
  485
- S
  487
- T
  491
- U
  493
- V
  494
- W
  494
- Z
  495
Index
497
- Numerics
  497
- A
  497
- B
  497
- C
  497
- D
  497
- E
  498
- F
  498
- G
  498
- H
  498
- I
  498
- J
  499
- L
  499
- M
  499
- N
  499
- O
  499
- P
  499
- R
  499
- S
  499
- T
  500
- U
  500
- V
  500

Dimensioni:

11,4 MB
Pagine:

502
Language:

English

Apri il manuale