Lucent Technologies 555-233-115 Manuale Utente
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-77
Add IP Interface Assembly
6
10. Click Start > Shut Down and select
Restart the computer?
or on the TN802:
Press the recessed reset button on the faceplate (see
) until
the LCD shows a flashing MSHUT *. When the flashing stops and the
asterisk disappears (about 2 min), reseat the circuit pack to restart the
system.
asterisk disappears (about 2 min), reseat the circuit pack to restart the
system.
or on the SAT:
a. Type busyout board
UUCSS and press
Enter
.
b. Type reset board
UUCSS and press
Enter
.
c. Type release board
UUCSS and press
Enter
.
Once the system is completely initialized, the LCD reads MEDPRO *.
!
WARNING:
When connected remotely via pcANYWHERE, only use the
pcANYWHERE Restart Host Computer button on the toolbar to
restart Windows NT.
pcANYWHERE Restart Host Computer button on the toolbar to
restart Windows NT.
11. Affix the new TN802B label to the circuit pack.
12. Disconnect the monitor, keyboard, and mouse.