Lucent Technologies 555-233-115 Manuale Utente
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-146
Installing a 3150/3170 Channel Service Unit
6
Installing a 3150/3170
Channel Service Unit
Channel Service Unit
1. Install the CSU as shown in
. For some installations (such as a
shows the Y-cable lengths. Be sure to label all
cables.
shows a typical connection from the H600-348 Quad cable to
the CSU, through the H600-307 network cable, and to the network
interface through the smart jacks. The quad cable provides up to four
connections using a 15-pin connector that plugs into the DTE jack on each
CSU. The H600-348 quad cable may require an adapter cable.
interface through the smart jacks. The quad cable provides up to four
connections using a 15-pin connector that plugs into the DTE jack on each
CSU. The H600-348 quad cable may require an adapter cable.
Figure 6-57.
3150/3170 Channel Service Unit Connections
1. H600-348 quad cable
2. 15-pin male “D” connectors (to DTE jacks on CSU)
3. Channel service unit (CSU)
4. H600-307 cable (RJ-48C to RJ-48C)
5. Network interface
6. Smart jack (if provided)
7. Cable A
8. Cable B
9. Cable C
10. Cable D
3150csu RBP 062696
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK