Cisco Systems Servers Manuale Utente
7-9
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
Assigning a User to a Group
A user can only belong to one group in Cisco Secure ACS. The user inherits the
attributes and operations assigned to his or her group. However, in the case of
conflicting settings, the settings at the user level override the settings configured
at the group level.
attributes and operations assigned to his or her group. However, in the case of
conflicting settings, the settings at the user level override the settings configured
at the group level.
By default, users are assigned to the Default Group. Users who authenticate via
the Unknown User method and who are not mapped to an existing
Cisco Secure ACS group are also assigned to the Default Group.
the Unknown User method and who are not mapped to an existing
Cisco Secure ACS group are also assigned to the Default Group.
To assign a user to a group, follow these steps:
Step 1
Perform Steps 1 through 3 of the
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
appears at the top of the page.
Step 2
From the Group to which user is assigned list in the User Setup table, select the
group to which you want to assign the user.
group to which you want to assign the user.
Step 3
Do one of the following:
a.
If you are finished configuring the user account options, click Submit to
record the options.
record the options.
b.
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
this chapter, as applicable.