Cisco Systems Servers Manuale Utente
7-11
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 7 Setting Up and Managing User Accounts
Basic User Setup Options
Step 3
Do one of the following:
a.
If you are finished configuring the user account options, click Submit to
record the options.
record the options.
b.
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
this chapter, as applicable.
Assigning a User to a Client IP Address
To assign a user to a client IP address, follow these steps:
Step 1
Perform Steps 1 through 3 of the
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
appears at the top of the page.
Step 2
Under Client IP Address Assignment in the User Setup table, select the applicable
option. Choices include the following:
option. Choices include the following:
Note
The IP address assignment in User Setup overrides the IP address
assignment in Group Setup.
assignment in Group Setup.
•
Use group settings—Select this option to use the IP address group
assignment.
assignment.
•
No IP address assignment—Select this option to override the group setting
if you do not want an IP address returned by the client.
if you do not want an IP address returned by the client.
•
Assigned by dialup client—Select this option to use the IP address dialup
client assignment.
client assignment.
•
Assign static IP address—Select this option and type the IP address in the
box, if a specific IP address should be used for this user.
box, if a specific IP address should be used for this user.
Note
If the IP address is being assigned from a pool of IP addresses or
by the dialup client, leave the Assign IP address box blank.
by the dialup client, leave the Assign IP address box blank.