Honeywell MS5100 Series Manuale Utente

 

 

9

I

NSTALLATION

 

 

 

1.  Turn off the host system. 

2.  Plug the male, 10-pin RJ45 end  

of the PowerLink cable into the  
10-pin socket on the MS5145. 

3.  Disconnect the keyboard from the 

host/PC. 

4.  Connect the Y ends of the PowerLink 

cable to the keyboard and the host’s 
keyboard port.  If necessary, use the 
supplied adapter cable to make the 
connections.  

5.  Plug the external power supply into the 

power jack on the PowerLink cable. 

 

Check the AC input 
requirements of the power 
supply to make sure the 
voltage matches the AC 
outlet.  The outlet must be 
located near the equipment. 

6.  Connect AC power to the transformer. 

7.  Turn on the host system. 

 

Powering the MS5145-47 directly from the computer can sometimes 
cause interference with the operation of the scanner or the computer.   
Not all computers supply the same current through the keyboard port, 
explaining why a scanner may work on one computer and not another. 
Contact a customer service representative if an external power supply is 
required. 

 

 

See page 5.