Honeywell MS5100 Series Manuale Utente

 

 

10 

I

NSTALLATION

 

 
1.  Turn off the host system.  

2.  Connect the 10-pin RJ45 male 

connector into the jack on the 
Eclipse.  There will be a ‘click’ when 
the connection is made. 
 

If the scanner is receiving 
power from the host system, 
skip to step #5.  

 

3.  Connect the L-shaped plug of the 

power supply into the power jack on 
the PowerLink cable.  

 

Make sure the AC input 
requirements of the power 
supply match the AC outlet.  
Connect the power supply  
into an AC outlet.  The outlet 
should be near the equipment 
and easily accessible. 

4.  Connect the PowerLink cable to the 

keyboard port on the host system. 

5.  Turn on the host system. 

 
 
 

 

Powering the MS5145-47 directly from the computer can sometimes 
cause interference with the operation of the scanner or the computer.   
Not all computers supply the same current through the keyboard port, 
explaining why a scanner may work on one computer and not another. 
Contact a customer service representative if an external power supply is 
required. 

 

 

See page 5.