Brother GT-%$! Manuale Utente

GT-541 

76 

Follow the procedure (Step 1 to 7) below until the print quality problem is solved. 
 

Step 1: Clean the Print Heads by pressing the Head Cleaning Button. 
Head Cleaning with flushing fresh ink can solve most print quality problems. See “7-2-2. Cleaning the 
Print Heads / Using the Head Cleaning” and do it a maximum of five    times. Check the nozzles by test 
printing of Nozzle Check Pattern (see "7-2-3. Checking Print Quality with Nozzle Check Pattern "). If the 
problem is not solved, go on to the next step. 
<Note> 
It is very important the machine is used in an environment as specified. Use a humidifier to keep the 
humidity up to 35% to keep print quality. 
<Note> 
Your printer automatically cleans its Print Heads every 24 prints; however more frequent Print Heads 
cleaning may need to be done depending on the environment. In this case, change the Auto Head 
Cleaning frequency (see “7-2-5. Changing the Auto Head Cleaning Setting”). 
 
Step 2: Check the Wiper Cleaner, replace it when it is full. 
The Wiper Cleaner absorbs some waste ink carried by the Wiper Blade. If Wiper Cleaner cannot 
absorb waste ink any more, the dirty Wiper Blade wipes the Print Head Nozzles and this causes 
misfiring or damage the Print Head. Please replace the Wiper Cleaner and clean the Wiper Blade and 
caps when you insert the new Black Ink Cartridge; Check if it is too dirty to wipe off the waste ink. Please 
use Cap Cleaning Kit. If the black ink is not changed frequently please consider the wiper. 

How to Check: 

(1)  See “6-1-2. Replacing the Wiper Cleaner” and select “Cap/Wiper Clean” and then turn off your 

printer. 

(2)  Open the Front Cover. 
(3)  Pull out the Wiper Cleaner Cassette in the left.