Canon 800II Manuale Utente
Chapter 3 Using the Scanner
40
6
Scanning ends.
The Start Scanning (Continue) dialog box appears.
In Semi-Auto mode, the scanner’s Start key switches to the ready state.
7
To scan another image, project the image onto the scanner
screen and click [Continue Scanning]. To stop scanning, click
[Stop Scanning].
In Semi-auto mode, you can continue scanning simply by pressing the Start
key on the scanner. To stop scanning, press the Clear key. The Start Scan-
ning (Continue) dialog box appears and scanning stops.
If you are using the FS Controller III, you can perform continuous scan-
ning from the FS Controller III keyboard. Refer to the FS Controller III
Instructions for details.
ning from the FS Controller III keyboard. Refer to the FS Controller III
Instructions for details.
8
Check the scanned images.
The [View] menu and Toolbar buttons can be used to check the image.
Fit to width: Matches the image width to the width of the window.
Best Fit: Displays the entire page so that it fits in the window.
Zoom In: Enlarges the image each time it is clicked. Once the image is displayed at 100%
scale, this menu is grayed out and the image cannot be enlarged further.
Zoom Out: Reduces the image each time it is clicked.
Rotate Left: Rotates the image left (counterclockwise) by 90°.
Rotate Right: Rotates the image right (clockwise) by 90°.
Next page: Displays the image on the next page.
(if TIFF is selected as the file format and multiple pages are scanned)
Previous Page: Displays the image on the previous page.
(if TIFF is selected as the file format and multiple pages are scanned)
NOTE
NOTE