Canon 800II ユーザーズマニュアル

40

Scanning ends.

 The Start Scanning (Continue) dialog box appears.

In Semi-Auto mode, the scanner’s Start key switches to the ready state.

To scan another image, project the image onto the scanner

screen and click [Continue Scanning]. To stop scanning, click

[Stop Scanning].

In Semi-auto mode, you can continue scanning simply by pressing the Start

key on the scanner. To stop scanning, press the Clear key. The Start Scan-

ning (Continue) dialog box appears and scanning stops.

If you are using the FS Controller III, you can perform continuous scan-
ning from the FS Controller III keyboard. Refer to the FS Controller III
Instructions for details.

Check the scanned images.

The [View] menu and Toolbar buttons can be used to check the image.

  Fit to width: Matches the image width to the width of the window.

  Best Fit: Displays the entire page so that it fits in the window.

  Zoom In: Enlarges the image each time it is clicked. Once the image is displayed at 100%

scale, this menu is grayed out and the image cannot be enlarged further.

  Zoom Out: Reduces the image each time it is clicked.

  Rotate Left: Rotates the image left (counterclockwise) by 90°.

  Rotate Right: Rotates the image right (clockwise) by 90°.

  Next page: Displays the image on the next page.

(if TIFF is selected as the file format and multiple pages are scanned)

  Previous Page: Displays the image on the previous page.

(if TIFF is selected as the file format and multiple pages are scanned)

NOTE

NOTE