Pressure Systems 98RK Manuale Utente
Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 95
www.PressureSystems.com
Example:
●
Send TCP/IP commands to 9816 module (via its connected socket) setting the
calibration valve to the CAL (or Re-zero) position:
calibration valve to the CAL (or Re-zero) position:
“w1200”
(Insure in RUN/CAL valve mode)
“w0C01”
(Set CAL position)
Responses
(both
commands):
"A"
"A"
Note
If programmer “knows” that module is already in RUN/CAL valve mode,
the first command above is optional. For more information, see Chapter
4, Figure 4.5.
the first command above is optional. For more information, see Chapter
4, Figure 4.5.