Pressure Systems 98RK Manuale Utente
Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 96
www.PressureSystems.com
NETWORK QUERY (UDP/IP Command 'psi9000')
Purpose:
To determine how many (and which) modules are powered-up and operational
on
the
network.
Command
“psi9000”
Response
"ipadr, ethadr, sernum, mtype, fmwver, connst, ipadrst, lisport,
subnet, iparpst, udpast, pwrst, rack, cluster, slot,"
subnet, iparpst, udpast, pwrst, rack, cluster, slot,"
Description: When a NetScanner
™
System module receives this broadcast command (by
continuously monitoring port 7000) it responds with a broadcast (on port 7001)
with an ASCII response containing comma-separated parameters. These are
listed in the following table:
with an ASCII response containing comma-separated parameters. These are
listed in the following table:
parameter
meaning
ipadr
IP Address
ethadr
Ethernet Address
sernum
Serial Number
mtype
Module Type (e.g., = 903x)
fmwver
Firmware Version (e.g., = 4.30)
connst
Connection Status (1=connected, 0=available)
ipadrst
IP Address Status (1=has one, 0=waiting for
server)
server)
lisport
TCP Connect Port (default = 9000)
subnet
Subnet Mask
iparpst
IP Address Resolution Method
(1=use RARP/BOOTP server,
0=use static IP Address stored internally)
(1=use RARP/BOOTP server,
0=use static IP Address stored internally)
udpast
UDP Auto Status (1=broadcasts this response
automatically after connection possible, 0=only
sends response for “psi9000” UDP/IP command.
automatically after connection possible, 0=only
sends response for “psi9000” UDP/IP command.
pwrst
Power Up Status (same a ‘q02' command
response)
response)
rack
Rack 0-F (0-15) of 98RK-1 chassis
cluster
Cluster 0-F (0-15) of 98RK-1 chassis
slot
Slot 1-8 of Model 9816 module in 98RK-1 chassis