Grizzly G0450 Manuale Utente
-18-
G0449/G0450 37" Drum Sander
Installing Handwheel
Components and Hardware Needed:
Qty
Handwheel ........................................................ 1
To mount the handwheel:
1. Place the handwheel over the shaft shown
in
Figure 11 and tighten the setscrew in the
handwheel hub.
Figure 11. Handwheel location.
Dust Collection
This drum sander requires a minimum of 1600
CFM at the sander. We recommend using a dust
collection system that produces a minimum of
2000 CFM. A fine layer of dust will be present on
your stock as it comes out of the sander. This is
normal.
CFM at the sander. We recommend using a dust
collection system that produces a minimum of
2000 CFM. A fine layer of dust will be present on
your stock as it comes out of the sander. This is
normal.
Components and Hardware Needed:
Qty
Dust Hoses 4" (not included) ........ Length Varies
Hose Clamps (not included) .......................Varies
Dust Collection System (not included) ...............1
Hose Clamps (not included) .......................Varies
Dust Collection System (not included) ...............1
To connect the dust ports to a dust collector:
1. Attach 4" dust collection hoses to the dust
ports shown in
Figure 12 and secure them
with hose clamps.
Figure 12. Dust port locations.