Grizzly G1128 Manuale Utente
-16-
G1128/G1129 Power Feeders
Operation
1.
Choose the feed rate at which to operate
your power feeder. The speed of the wheels
will have a large impact on how well your
table saw or shaper will perform.
your power feeder. The speed of the wheels
will have a large impact on how well your
table saw or shaper will perform.
2.
Orient your power feeder depending on your
job. The motor/wheel assembly can be ori-
ented so that the wheels are either horizon-
tal or vertical.
job. The motor/wheel assembly can be ori-
ented so that the wheels are either horizon-
tal or vertical.
Figure 12
and
Figure 13.
3.
Adjust the distance between the wheels and
the table top or fence (depending on the ori-
entation of the wheels). The distance should
be about
the table top or fence (depending on the ori-
entation of the wheels). The distance should
be about
1
⁄
16
"-
1
⁄
8
" less than the thickness of
the wood.
4.
Ensure that the power feeder position is
securely locked. Also ensure that the fence
is securely locked.
securely locked. Also ensure that the fence
is securely locked.
5.
Turn on the power feeder and the tool it is
mounted to. Slowly feed your workpiece into
and under the wheels of the power feeder.
mounted to. Slowly feed your workpiece into
and under the wheels of the power feeder.
6.
Retrieve the workpiece as it feeds out of the
machine.
machine.
Do not stand directly in front of
or in back of the workpiece as it is feed-
ing through your power tool. Stand to one
side.
ing through your power tool. Stand to one
side.
Figure 13.
Figure 12.