Grizzly G0664 Manuale Utente
-38-
g0664 heavy duty Metal-Cutting Bandsaw
Tips for horizontal cutting:
•
use the work stop to quickly and accurately
cut multiple pieces of stock to the same
length.
cut multiple pieces of stock to the same
length.
•
Clamp the material in the vise jaws to ensure
a straight cut through the material.
a straight cut through the material.
•
let the blade reach full speed before engag-
ing the workpiece.
ing the workpiece.
•
never start a cut with the blade in contact
with the workpiece and do not start a cut on
a sharp edge.
with the workpiece and do not start a cut on
a sharp edge.
Operation Tips
NOTICE
Loosen blade tension at the end of each day
to prolong blade life.
the following tips will help you safely and effec-
tively operate your bandsaw and get the maxi-
mum life out of your saw blades.
tively operate your bandsaw and get the maxi-
mum life out of your saw blades.
•
Chips should be curled and silvery. if the
chips are thin and powder like, increase your
feed rate.
chips are thin and powder like, increase your
feed rate.
•
Burned chips indicate a need to reduce your
blade speed.
blade speed.
•
Wait until the blade has completely stopped
before removing the workpiece from the vise,
and avoid touching the cut end—it could be
very hot!
before removing the workpiece from the vise,
and avoid touching the cut end—it could be
very hot!
•
support long pieces so they won't fall when
cut, and flag the ends to alert passers-by of
potential danger.
cut, and flag the ends to alert passers-by of
potential danger.
•
adjust the blade guides as close as possible
to the workpiece to minimize side-to-side
blade movement.
to the workpiece to minimize side-to-side
blade movement.
•
use cutting fluid when possible to increase
blade life.
blade life.