3com 3013 (3C13613) Manuale Utente

C

HAPTER

 2: I

NSTALLING

 

THE

 R

OUTER

■

Ethernet cable

■

Console cable

■

AUX cable

■

Power supply, power cord, and chassis ground wire

■

Equipment

A router

Ethernet 10/100BASE-T Hub or LAN switch

Channel service unit/data service unit (CSU/DSU) or other data communications 
equipment (DCE) equipment (such as a modem)

Configuration terminal, such as a PC

The Router 3000 can be mounted onto a vertical surface using two pan-head 
screws aligned to the brackets on the base of the router. To mount the router on a 
vertical surface, do the following:

1 Mark the bracket positions on the wall. 

2 Screw two pan-head screws into the marked positions on the wall or other vertical 

surface, so that the screws match the position of the two brackets on the base of 
the router. Each screw should project 0.6 cm (.25 in) from the wall or the surface. 

3 Make sure that the front panel LEDs are easily visible to the operator.

4 Hang the router on the screws by the two brackets.

5 Secure the external power supply of the router to prevent the power cords from 

detaching.

See Figure 9 and Figure 10 for illustrations of this procedure.

Figure 9   The Bottom of the Router

120mm

4.72in