Cisco Systems 815 Manuale Utente
Appendix C Installing and Upgrading Memory and Virtual Private Network Modules
Installing and Removing a DIMM
C-6
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
Step 2
Place the DIMM in an antistatic bag to protect it from ESD damage.
Installing a DIMM
Caution
Do not insert DIMMs into the same connector more than 25 times. Overuse can
damage the connector.
damage the connector.
To install a DIMM, follow these steps:
Step 1
Make sure that both latches on the DIMM connector are open.
Step 2
Orient the DIMM so that the polarization notch lines up with the key in the
connector. See
connector. See
Step 3
Carefully insert the DIMM into the connector.
Step 4
Carefully and firmly press the DIMM into the connector until both latches rotate
to the closed position against the DIMM.
to the closed position against the DIMM.
Figure C-5
Installing a DIMM
1
Insert the DIMM
2
Latches rotate to closed position
155844
2
2
1