Grizzly G0763 Manuale Utente

-24-

Model G0763 (Mfg. Since 8/13)

SECTION 4: OPERATIONS

Operation Overview

The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.

Due to the generic nature of this overview, it is

not intended to be an instructional guide. To learn
more  about  specific  operations,  read  this  entire
manual  and  seek  additional  training  from  expe-
rienced  machine  operators,  and  do  additional
research outside of this manual by reading "how-
to" books, trade magazines, or websites.

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

If you are not experienced with this type

of machine, WE STRONGLY RECOMMEND

that you seek additional training outside of

this manual. Read books/magazines or get

formal training before beginning any proj-

ects. Regardless of the content in this sec-

tion, Grizzly Industrial will not be held liable

for accidents caused by lack of training.

To complete a typical operation, the operator

does the following:

1. Examines the grinding wheel to make sure it

is suitable for use.

2. Examines the workpiece to make sure it is

properly prepared for grinding.

3. Uses the Z-axis handwheel to raise the grind-

ing wheel assembly to provide clearance for
mounting the workpiece.

4. Uses the magnetic chuck to hold the

workpiece to the table, then turns the Z-axis
handwheel to lower the grinding wheel to just
above the top surface of the workpiece.

5. Turns the grinder ON, then waits until the

wheel reaches full speed.

6. Performs the grinding operation.

Note: Because the method for perform-
ing each grinding operation varies, specific
actions are not listed here.

7. When the grinding operation is complete,

turns the grinder

OFF and allows the grinding

wheel to come to a complete stop.

8. Removes the workpiece from the table.

Damage to eyes, respiratory system, or feet

could result from using this machine with-

out proper protection. Always wear eye pro-

tection, respirator, and leather boots with

extra toe protection.