John Deere ET-3103-J Manuale Utente

Pagina di 76
      
Cordless Impact Wrench Operator's Manual   
                  
             13  
3.  Charging: When the battery is connected to the battery   
 
charger, charging will commence and the pilot lamp  
 
 
will light in red. (See Table 2):
NOTE:  If the pilot lamp flickers in red, pull out the plug from the  
 
 
receptacle and  check if the battery is properly mounted.
When the battery is fully charged, the pilot lamp will blink in red 
slowly. (At 1-second intervals) (See Table 2)
 
a.  Pilot lamp indication: The indications of the pilot    
 
 
lamp will be as shown in Table 2, according to  
 
 
 
the condition of the charger or the rechargeable    
 
 
battery.
 
b.  Regarding the temperature of the rechargeable    
 
 
battery. The temperatures for rechargeable  
 
 
 
batteries are as shown in the table below, and  
 
 
 
batteries  that have become hot should be cooled   
 
 
for a while before being recharged.
 
c.  Regarding recharging time (At 68°F (20°C)) In  
 
 
 
approx. 50 minutes.
Assembly 
CHARGING METHOD: (CONTINUED)
Table 2:  Indications of the pilot lamp
Table 3:  Recharging of batteries that have become hot
Temperatures at which the battery can be recharged
23°F—140°F 
(–5°C—60°C)
Rechargeable batteries
EB1220BL
NOTE:  The charging time may vary according to temperature and power source 
 
 
voltage.
Lights for 0.5 seconds. Does not light for 
0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for 
0.5 seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for 
0.1 seconds. (off for 0.1 seconds)
Lights continuously
Before 
charging
While 
charging
Charging 
complete
Charging 
impossible
Charging 
impossible
Malfunction in 
the battery or the 
charger
The battery tem-
perature is high, 
making recharg-
ing impossible.
Blinks 
(RED)
Lights 
(RED)
Blinks 
(RED)
Flickers 
(RED)
Lights 
(GREEN)