Garmin 225B Manuale Utente

3-2

Garmin GTR 225/225A/225B Pilot’s Guide

190-01182-00 Rev. A

1. Press the FUNC key to access the Functions.

2. Turn the LARGE

knob to select the COM, ICS, or SYS functions.

3. Turn the SMALL knob to view the choices in each function.

4. Press the ENT key to access the function.

5. Press the FUNC key again to exit Functions.

3.2

Com Frequencies

The Com Frequencies category in the Functions section contains recently

used frequencies (Recent), user-defined frequencies (User), and a database of all
frequencies provided in the standard default memory (Database).

3.2.1 Recent Com Frequencies

The last 20 Com frequencies used are kept in the list of Recent Com

Frequencies and can be accessed in this function.

NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-

specific user frequencies will be deleted from the user frequency list. This
only affects the user frequencies within the 8.33 kHz spectrum.

1. Press FUNC to access the Functions. Turn the LARGE

knob to

select the Com Function. Turn the SMALL knob to view the
Recent frequency function. Then, press ENT.

2. Turn the SMALL knob to select an Entry (1-20).

Turn SMALL Knob

To Select Entry

Selected Frequency

Press ENT to Make the Selected

Frequency the Standby

Press <-> To Make the

Selected Frequency The

Active Frequency

Figure 3-2 Recent Com Frequencies

3. Press and release the FLIP/FLOP

key to transfer the displayed

channel to the Active frequency position. Press the ENT

key

to transfer the displayed channel to the Standby frequency
position.