Garmin 225B Manuale Utente

3-3

190-01182-00 Rev. A

Garmin GTR 225/225A/225B Pilot’s Guide

3.2.2 Com User Frequencies

Fifteen Com User Frequencies can be saved with an assigned waypoint

(WPT) identifier and Type.

NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-

specific user frequencies will be deleted from the user frequency list. This
only affects the user frequencies within the 8.33 kHz spectrum.

3.2.2.1

Viewing the Com User Frequency

1. Press FUNC to access the Functions. Turn the LARGE

knob

to select the Com Frequency Function.

Select Wpt Name

Select Wpt Type

Selected Frequency

Figure 3-3 Viewing User Com Frequencies

2. Turn the SMALL knob to view the Com User frequency

function. Then, press ENT. Turn the SMALL knob to view the
User Frequencies.

3. Press and release the FLIP/FLOP key to set the displayed

frequency as the Active frequency.

4. Press the ENT key to set the displayed frequency as the Standby

frequency.

3.2.2.2

Deleting the Com User Frequency

1. Press the CLR key to delete this User frequency.

Position In List.

Turn SMALL Knob

To Select Entry.

Selected Frequency

Press ENT To Confirm

Deleting The Selected Freq

Press ENT Key To Delete

Selected Freq

Active Frequency

Figure 3-4 Deleting User Com Frequencies