Bunn LCC-2 LP Manuale Utente

OPERATING CONTROLS AND INTERFACE

Refer to the photos on the following page for the location of these features.

1. Dispense Switches: Push to dispense product.

2. Stop Switch: Momentary switch stops all dispense functions.

3. Hot Water Switch: Push and Hold switch to dispense hot water from the center dispense tip.

4. Carafe Switch: Momentarily pushed to select the Carafe dispense Volume.

5. Power LED: Red - illuminates when AC power is applied to dispenser.

6. Ready LED: Green - illuminates when the water is at the preset ready temperature.

7. Carafe LED: Yellow - illuminates when the portion dispense option has been selected, (5 second delay).

8. Rinse LED: Yellow - illuminates when the optional preset rinse alarm time has elapsed.

9. Left Refill LED: Yellow - illuminates when the Left Concentrate Can needs replaced.

10. Right Refill LED: Yellow - illuminates when the Right Concentrate Can needs replaced.

11. Function Selector Switch: Allows the user to select different dispensing functions. (Located behind the splash

guard panel)

a. Rinse: Dispenses hot water only- Flushes the mix chamber and dispense tip.

b. Prime: Dispenses concentrates only – Primes the concentrate pump.

c. Normal: Normal dispense mode - Dispenses mixed product (concentrate and water).

12. Mode Selector Switch: Allows the user to select different operating modes.

a. Run: Normal operating position.

b. Night: Anti-pilfering mode that disables dispensing, but keeps heater and chiller operational.

WARNING - The NIGHT Mode does not remove AC power from the dispenser. Disconnect power source before

servicing the dispenser.

c. Program: Enables programming and set up of the dispenser.

13. Programming Switches: Used in conjunction with the LED display to program and calibrate the dispenser to

customer specific requirements.

a. MENU: used to scroll to the next menu screen.

b. (+): used to increase the displayed value.

c. (-): used to decrease the displayed value.

14. LED Display: Displays programming menus and fault messages.

(Continued Next Page)

39288 083106