Bunn MCP Manuale Utente

ROUTINE CLEANING

Before beginning any cleaning procedure, unplug the brewer to avoid the

accidental start of a brew cycle.

Clean the pod holder, drip tray and drip tray grate

after each use, using a damp cloth and mild detergent

and rinse. With the pod holder and drip tray removed,

use a damp cloth with mild detergent to wipe the

area below the pod holder and into the drip tray area.

Occasionally, wipe the outside of the brewer with a

damp cloth. (The reservoir, slide lid, pod holder, drip

tray and drip tray grate are dishwasher safe.)

PERIODIC CLEANING/DESCALING

(Recommended At Least Once a Month.)

Periodically, you should clean and descale the brewer to clear any

mineral deposits that may have accumulated due to impurities in the water

source. If these deposits are not removed, they can impair the operation of

the brewer and reduce the product life.

There are several products available speciﬁcally for descaling. We

recommend using URNEX

Activated Descaler or JavaClean2 Cleaner and

Descaler, available on our web site: www.bunn.com. (White vinegar can be

used to descale if a descaling product is not available.)

Follow the directions as printed on the manufacturer’s package.

1) Fill the reservoir with descaling product as described by the

manufacturer’s directions, or 1 quart (32 oz.) of

white vinegar. Do not add powder mix directly to

the reservoir. Descaling product must be mixed into a

solution before it is added to the reservoir.)

2) Place an empty pod holder into the brewer. Be

sure the holder is locked into place, and set the

VOLUME CONTROL SLIDE LEVER to the maximum

position. (12 oz.)

3) Place an empty cup or bowl on the drip tray grate

that will hold at least 14 oz. of liquid, and press the

COFFEE BREW BUTTON to start a brew cycle.

4) Once the brew cycle has ﬁnished, empty the cup

and set it back onto the drip tray grate. Press the

COFFEE BREW BUTTON again to start a second

brew cycle.

5) Once the brew cycle has ﬁnished, empty the

cup and the remaining solution, or vinegar from

the reservoir. Remove the Pod Holder; clean the

reservoir and pod holder thoroughly using a mild

detergent, then rinse.

NOTE: There is now descaling solution in the internal

tank. Follow the manufacturer’s directions if the

solution must be left in the tank for any period of

time. For vinegar, allow the solution to sit for at least

two, but no more that four hours.

6) Fill the reservoir to the maximum line with fresh

clean cold water and place the pod holder back into the brewer.