Grizzly G0770 Manuale Utente

-12-

Model G0770 (Mfd Since 11/13)

Test Run

DO NOT start machine until all preceding

setup instructions have been performed.

Operating an improperly setup machine

may result in malfunction or unexpect-

ed results that can lead to serious injury,

death, or machine/property damage.

Serious injury or death can result from

using this machine BEfORE understanding

its controls and related safety information.

DO NOT operate, or allow others to operate,

machine until the information is understood.

test run the saw to ensure it is properly connected
to power and operates correctly.

if you find an unusual problem during the test
run, immediately stop the saw, disconnect it from
power, and fix the problem BeFore operating the
machine again. the

Troubleshooting table in the

SERVICE section of this manual can help.

To test run the meat saw:

1. disCoNNeCt sAW FroM poWer!

2. rotate both wheel cover knobs (see Page 3)

clockwise to open wheel cover and expose
wheels.

3. Make sure of the following blade conditions

(see

figures 3–4 for identification):

• Blade teeth face down through table.

• Blade is within

⁄

" of wheel back lip on

both wheels.

• Blade is properly positioned between blade

guide and against blade wipers.

figure 4. Bottom wheel blade wipers.

Blade

Wiper

Blade Wiper

figure 3. top wheel blade.

Wheel

Back lip

Blade guide

Blade

Wipers