Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente
Codici prodotto
11-02-06-02-01.005
Installation
MoRoS Modem/ISDN
10
June 06
4 Installation
1.
Mounting on DIN rail
2.
Connecting the power supply
a) connecting the ground connection
b) connecting the power supply 10..60V DC
b) connecting the power supply 10..60V DC
Note:
The minimum value is 10V DC.
The maximum value is 60V DC.
3.
Switch on power supply
The green ”Power” LED lights up.
The green ”Power” LED lights up.
4.
Connection to the PC
The network card of the PC must be connected to any one of the four MoRoS
Ethernet ports.
The network card of the PC must be connected to any one of the four MoRoS
Ethernet ports.
5.
Connection to the telephone network
The ”RJ45/Line” plug is connected as follows:
The ”RJ45/Line” plug is connected as follows:
- for the MoRoS Modem, via the supplied phone cord with the TAE
(German telephone plug unit).
- for the MoRoS ISDN, via the supplied ISDN cord with the ISDN S0 bus
or with the internal S0 bus of an ISDN phone system.