Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente
Codici prodotto
11-02-06-02-01.005
MoRoS Modem/ISDN
Configuration
June 06
15
Select the protocol “TCP/IP” and click on Properties.
Set the IP addresses on the tab “IP Address“. We recommend entering 192.168.1.2 as the
IP address. The MoRoS has the IP address 192.168.1.1. Enter 255.255.255.0 as sub
network mask.
IP address. The MoRoS has the IP address 192.168.1.1. Enter 255.255.255.0 as sub
network mask.
Enter the IP address of the MoRoS, 192.168.1.1, on the tab "Gateway". This route is
activated after you click “Add”.
activated after you click “Add”.
Windows 98 must be restarted after all settings are completed.
5.1.4 Linux
A detailed description for the configuration of the IP address in this manual can not be
given. Linux distributors supply different tools. The exact steps for the Ethernet interface
settings are usually explained in the online help or at so-called “Knowledge Portals“, or in
“Forums“ of the according distributor.
The basic steps for the configuration in a shell:
It is assumed that the network interface to be configured has the name “eth0”. This is in
most cases the first (and only) network card in the computer. "Root privileges” for the
configuration are needed.
The command
given. Linux distributors supply different tools. The exact steps for the Ethernet interface
settings are usually explained in the online help or at so-called “Knowledge Portals“, or in
“Forums“ of the according distributor.
The basic steps for the configuration in a shell:
It is assumed that the network interface to be configured has the name “eth0”. This is in
most cases the first (and only) network card in the computer. "Root privileges” for the
configuration are needed.
The command
ifconfig eth0 192.168.1.2
sets the IP address for the network interface eth0 to 192.168.1.2.
The command
The command
route add default gw 192.168.1.1
sets MoRoS as the default gateway.
5.2 Initial Configuration
The configuration interface is displayed via a browser. Enter the URL “http://192.168.1.1”
to access the interface. In this case, the browser “Mozilla Firefox” was used.
to access the interface. In this case, the browser “Mozilla Firefox” was used.
Browsers usually provide a button called “Reboot” or “Reload”. Avoid
clicking this button under all circumstances!
To update a page, click on the according button in the content window of the browser.
Alternatively, to confirm the URL in the URL bar the return key may be used as well. This
will reload the MoRoS start page.
Alternatively, to confirm the URL in the URL bar the return key may be used as well. This
will reload the MoRoS start page.