Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente
Codici prodotto
11-02-06-02-01.005
MoRoS Modem/ISDN
Functions
June 06
27
If the MoRoS is connected to a phone system, it may be necessary to enter the prefix “0”
and/or “,” before the phone number.
and/or “,” before the phone number.
Enter a value for “Idle time” to set the time after which a Dial-Out connection is
automatically terminated, if no data is transmitted during the set time.
automatically terminated, if no data is transmitted during the set time.
The connection is only then terminated automatically if no data packets are
transmitted during the entire "Idle time". If a data packet is transmitted, the
“Idle timer” starts counting from the beginning.
“Idle timer” starts counting from the beginning.
The setting “0” will prevent the automatic termination of the connection. In this case, a
connection remains established until the remote terminal terminates the connection.
The maximum number of seconds is 2,147,483,648 (24.85 days).
connection remains established until the remote terminal terminates the connection.
The maximum number of seconds is 2,147,483,648 (24.85 days).
For most dial-up connections, an authentication with the remote terminal is required.
The user name, the password and the authentication type can be set at this point.
The user name, the password and the authentication type can be set at this point.
Some ISP will not require a user name or a password. If the dial-up to the ISP is not
working although these two fields were left empty, it is possible that the ISP does not
require a particular user name and password, but is waiting for any text in these fields. In
this case, any names can be entered in those fields.
working although these two fields were left empty, it is possible that the ISP does not
require a particular user name and password, but is waiting for any text in these fields. In
this case, any names can be entered in those fields.