Insys GSM 4.2 I4 11-02-01-03-01.038 Manuale Utente
Codici prodotto
11-02-01-03-01.038
INSYS GSM 4.2 I4
Initial Operation
Dez-06
25
The slot for the SIM card is on the front of the device.
Unlocking the card reader:
1.
Turn the power supply off.
2.
To unlock the cardholder, press the sunken, yellow button on the card reader.
3.
Remove the cardholder.
4.
Insert the SIM card into the cardholder with the contacts facing upwards.
5.
Push the cardholder back into the card reader (contacts of the SIM card to the
left), until the cardholder is flush with the housing top.
left), until the cardholder is flush with the housing top.
6.
Turn the power supply on.
The device starts the initializing process.
The device starts the initializing process.
Initialization:
1.
1.
LED Connect or LED DCD light up for approx. 4 seconds.
2.
After 8 more seconds the LED Status starts to flash for approx. 20 seconds.
When the device has successfully logged in, the following LEDs will light up:
LED Power
LED Status
The LED Signal displays the strength of the GSM signal.
LED Status
The LED Signal displays the strength of the GSM signal.
3.7
Connection Test
After this successful initial configuration, you can easily check whether your device is
connected with the GSM network:
Dial the number of a phone connection (e.g. your mobile phone) from the terminal win-
dow of the HSComm or from your terminal program.
Dialing a telephone
<n>
connected with the GSM network:
Dial the number of a phone connection (e.g. your mobile phone) from the terminal win-
dow of the HSComm or from your terminal program.
Dialing a telephone
<n>
e.g. Number of your mobile phone
ATD <n>
The ringing will indicate that the device is attempting to establish the connection.