Insys GSM 4.2 I4 11-02-01-03-01.038 Manuale Utente
Codici prodotto
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
36
Dez-06
6
Functions and their configuration
The functions of the device can be configured easily using the configuration software
HSComm, or directly via AT commands.
HSComm, or directly via AT commands.
6.1
Procedures: Configure the basic settings
The basic settings can be configured in the Software HSComm on the tab "Basic set-
tings".
tings".
6.1.1 GSM connection
PIN
You can save the SIM card PIN in the device. The device will automatically dial into the
GSM network during startup. The default PIN setting is "0000".
To operate SIM cards without PIN, you may delete the PIN.
You can save the SIM card PIN in the device. The device will automatically dial into the
GSM network during startup. The default PIN setting is "0000".
To operate SIM cards without PIN, you may delete the PIN.
Switching the SIM Card
Prior to switching the SIM card, you must change or delete the PIN.
Otherwise, the SIM card will be blocked after three unsuccessful
login attempts.
Prior to switching the SIM card, you must change or delete the PIN.
Otherwise, the SIM card will be blocked after three unsuccessful
login attempts.
Note
Automatic login at restart is only possible if the PIN is stored in the
device.
Automatic login at restart is only possible if the PIN is stored in the
device.
Service Center Number SCN
To send SMS, the service center number (SCN) of your own GSM provider must be en-
tered. (see Chap. 6 )
To send SMS, the service center number (SCN) of your own GSM provider must be en-
tered. (see Chap. 6 )