Insys GPRS 4.2 11-02-01-03-10.008 Manuale Utente

Manual Supplement Insys GSM/GPRS 4.0 

21  

Version 1.0 / 07.03 

 

 

The configuration of the modem and the network connection is finished now. 

The INSYS GSM/GPRS 4.0 hast to be configured once as well because the 
standard modem drivers do not perform the GSM specific settings. 
 
These settings refer only to the GPRS functionality, of course further functions 
(alarm messages, …) can also be configured, but please take this from the 

regular user’s manual. 
 
The following settings should be made, either using a terminal program or the 
configuration software HS-Comm for GSM.   
 

- 

Baud rate to 57600 (AT**BAUD=57600, then change terminal to 57600 
bps)) 

- 

Data flow control hardware handshake (AT\Q3) 

- 

PIN of the SIM card to automatic login after reset (AT**PIN=xxxx), as far 
as the PIN request is activated at the card. 

- 

Store settings with AT&W.