GE Monogram ZXR859 Manuale Utente
Installation Instructions
7
3 INSTALL LOWER SUPPORT FRAME
• Insert lower support frame (from required accessory
ZXR858, ZXR859 or ZXR8510) into the upper
support frame and loosely secure with 8 screws and
washers (4 on the front and 4 on the back sides).
support frame and loosely secure with 8 screws and
washers (4 on the front and 4 on the back sides).
• Adjust the lower support frame up or down to the
desired height above the countertop. Tighten screws.
2 INSTALL UPPER SUPPORT FRAME
• Install the plastic upper duct connector to the
upper support frame by inserting from the bottom
and snapping into the opening of the air deflector
(already installed).
and snapping into the opening of the air deflector
(already installed).
• Secure the upper support frame to the ceiling joists
and/or cross framing with the 4 screws provided.
For maximum rigidity and strength, the screws must
be driven into the center of the joists and/or cross
framing.
For maximum rigidity and strength, the screws must
be driven into the center of the joists and/or cross
framing.
• Check to be sure the support frame is level,
vertically and horizontally.
Important:
Again, check to be sure the support is
level in both directions. There is no way to level the
hood after the hood is secured to the frame.
hood after the hood is secured to the frame.
25-1/2" Recommended
13-5/8
*39-1/8"
Countertop
Hood
Mounting
Flange
Mounting
Flange
Lower Support
**75-1/8"
to Floor
*Note: 39-1/8” to top of hood flange can be increased up to
42” max.
**75-1/8” min to floor, 77-7/8” max.
42” max.
**75-1/8” min to floor, 77-7/8” max.
Support
Frame
Opening
Frame
Opening
Upper
Support
Frame
Lower
Support
Frame
Check Level in
Both Direction
Both Direction
Front
Of
Hood
Air
Deflector
Deflector
Plastic Upper
Duct Connector
Duct Connector