Multi Tech Equipment MVH306DS2 Manuale Utente

When storing your compactor for long periods do the 

following:
1.  Run the engine at idle speed for 3-5 minutes.
2.  Stop the engine. Drain the engine crankcase oil while 

the engine is still warm. Fill Engine crankcase with 

fresh oil.

3.  Remove the rubber plug (Figure 41) on the rocker 

arm cover and add about 2 cc of lube oil. Reinstall 

rubber plug.

4.  For recoil type compactors, push the decompression 

down (non-decompression position) and hold it while 

you pull the recoil starter grip (Figure 42) rope 2 or 3 

times. 

dO nOT start the engine.

RUBBER

PLUG

DECOMPRESSION

LEVER

STARTER

GRIP

5.  For electric start type compactors, turn the engine for 

2 or 3 seconds with the decompression lever set in the 

non-decompression position, and the starter key at the 

START position. dO nOT start the engine.

6.  Pull the decompression lever up. Pull the recoil starter 

grip slowly. 

STOP when it feels tight. This closes the 

intake and exhaust valves (compression position) , and 

helps prevents ruts from forming.

7.  Wipe any oil or dirt that may have accumulated on the 

compactor. 

8.  Store compactor in a cool dry place out of the reach 

of children or unauthorized personnel