Maytag MCS 16021937 Manuale Utente

To avoid electrical shock which can
cause severe personal injury or death,
disconnect power to refrigerator
before removing doors.

After

replacing doors, connect power.

To avoid possible injury, product, or
property damage, you will need two
people to perform the following
instructions.

3. Pull drawer open to full extension.

4. Remove Phillips screw from each side

of rail system. (Some models)

2. Remove lower basket by pressing

inward on basket sides, then lift
basket.

5. Lift top of door to unhook door

supports from rail system. Lift door
out to remove.

1. Pull both rails out to full extension.

5. With drawer pulled out to full

extension, insert lower basket by
aligning tabs on both sides of lower
basket with notches in rail assembly.
Verify that the basket sides are
hooked securely over the rails.

6. Slide upper basket into freezer. Make

sure that rear of basket hooks behind
rail catch.

3. Lower door into final position.

4. Replace and tighten Phillips screws

that were removed from each side of
rail system.

1. Pull upper basket out to full extension

and lift out to remove.

2. While supporting door, hook door

supports into tabs located on inside
of rail.