Mustang Survival MD1250 Manuale Utente
Readiness checklist
if the inflator expiry date has passed, Mustang Survival recommends water
testing the MD1250 lP to become familiar with its in-water functionality.
testing the MD1250 lP to become familiar with its in-water functionality.
When all boxes are checked, the LP is ready for use:
F
Status indicator is green.
F
Inflator expiry date has not passed.
F
Fabric, straps, and hardware are free from defects.
F
The beaded manual inflation handle is fastened.
F
No rips, tears, or holes, and all seams are securely sewn.
F
All zippers, Velcro® tabs, and buckles are securely fastened.
note: if there are any concerns about the readiness of the MD1250 lP,
contact the Mustang Survival dealer.
contact the Mustang Survival dealer.
WeaRing the lP
note: each MD1250 lP provides 35 lb of flotation (70 lb paired).
To avoid injury to the user or damage to the LP, the LP should never be
worn under clothing or anything else that might restrict inflation.
To be fully effective, attach the LP to an LE belt or integrated PALS and
MOLLE vest, ensuring that all belts, straps, and attachments are adjusted for
a secure, comfortable fit. Improper attachment impedes LP effectiveness.
The LPs are designed to be worn on a specific side of the body. Ensure the LP
marked "L" is worn on the left, and the LP marked "R" is worn on the right.
worn under clothing or anything else that might restrict inflation.
To be fully effective, attach the LP to an LE belt or integrated PALS and
MOLLE vest, ensuring that all belts, straps, and attachments are adjusted for
a secure, comfortable fit. Improper attachment impedes LP effectiveness.
The LPs are designed to be worn on a specific side of the body. Ensure the LP
marked "L" is worn on the left, and the LP marked "R" is worn on the right.
using an le belt
The LP can be attached to an LE belt of up to three inches in width using
the attachment webbing straps on the back of the LP.
1. Release the attachment webbing straps on the back of the LP by pulling
the attachment webbing straps on the back of the LP.
1. Release the attachment webbing straps on the back of the LP by pulling
up on each strap just below the bottom edge of the pull-the-dot snap.
2. Feed the attachment webbing straps on the back of the LP around the
LE belt.
3. Reattach the pull-the-dot snaps by pushing down on the top edge of
the snap opposite the dot.
using integrated PalS Webbing and a Molle Vest
WaRning: Suitable anchor points must be used for secure attachment.
The LP can be attached to integrated PALS webbing and a MOLLE vest using
the attachment webbing straps on the back of the LP.
1. Lay the MOLLE vest down on a clean, flat surface with the front of the
the attachment webbing straps on the back of the LP.
1. Lay the MOLLE vest down on a clean, flat surface with the front of the
vest facing up.
Tactical Inflatable Side Pouch LP
Owners Manual
3