Mustang Survival MD1250 Manuale Utente

4.  Release the mouthpiece, and turn the locking ring counterclockwise to 

close the inflator valve and lock the mouthpiece in place.

Once the LPs have been inflated through 
manual, automatic, or oral inflation, tuck the 
inflated cells underneath each arm (Figure 6).
Attach the left and right cells together using the 
Velcro® straps located at the front of each lobe.

Any time complete manual control of inflation is required, the LP can be 
converted from manual/automatic inflation to manual-only inflation by 
attaching the automatic/manual conversion cap.
The conversion can be reversed by removing the conversion cap.
1.  Open the Velcro® cover over the hydrostaic inflator.
2.  Remove the conversion cap from the elastic storage pocket.
3.  Position the conversion cap 

over the hydrostatic water 
inlet valve (Figure 7).

4.  Secure the conversion cap 

to the water inlet valve by 
applying pressure to the 
conversion cap at the metal 
clip until it locks in place 
(Figure 8).

To reverse the conversion:
1.  Remove the conversion cap by pulling firmly on the lanyard.
2.  Store the conversion cap in the elastic storage pocket. 

1.  Locate the oral inflation tube, and turn the locking 

ring clockwise to open the inflator valve and unlock 
the mouthpiece (Figure 9).

2.  Press (and hold) the mouthpiece down.
3.  Gently squeeze the inflation cell until fully deflated, 

ensuring all air or CO

2

 is removed.

Figure 9

Figure 7

Figure 8

Figure 6

Tactical Inflatable Side Pouch LP 

 

5