Mustang Survival MD3091 Manuale Utente
WEARING
NOTE: The LP provides 35 lbs of flotation, and is designed for users
weighing more than 80 lbs and with a chest size of 30-52 inches.
weighing more than 80 lbs and with a chest size of 30-52 inches.
The LP must be properly adjusted to fit the individual wearing it. Incorrect
fit, or improper fastening of attachments can impede LP effectiveness.
•
fit, or improper fastening of attachments can impede LP effectiveness.
•
To avoid injury to the user or damage to the LP, the LP should never be
worn under clothing or anything else that could restrict inflation.
worn under clothing or anything else that could restrict inflation.
•
Belts and straps should be adjusted for secure, comfortable fit. When
the LP is integrated with MOLLE webbing system and body armor vest,
ensure all connections are securely fastened – see Integrating PALS with
a MOLLE Vest.
the LP is integrated with MOLLE webbing system and body armor vest,
ensure all connections are securely fastened – see Integrating PALS with
a MOLLE Vest.
•
When the LP is used in conjunction with the MA3090 harness assembly,
the waist belt should fit securely – see Attaching the MA3090 Harness.
the waist belt should fit securely – see Attaching the MA3090 Harness.
INFLATING
WARNING: The MD3091 LP must be manually activated by the user; it
does not automatically inflate upon submersion.
does not automatically inflate upon submersion.
NOTE: When using the MD3196 LP in temperatures below freezing, fully
discharging the CO
discharging the CO
2
cylinder may not provide adequate inflation; use the
oral inflator to top-up the LP.
Manual Inflation
Manually activate the inflation mechanism for either LP by jerking firmly
downward on the beaded manual inflation handle. The LP should fully
inflate within five seconds.
downward on the beaded manual inflation handle. The LP should fully
inflate within five seconds.
Auto-Inflation – MD3196
CAUTION: If the MD3196 LP has been manually inflated, CO
2
inflation
could over-pressurize and damage it.
When the inflator is submerged more than approximately four inches
in
water the hydrostatic water inlet valve opens letting water contact the
water-sensitive element. The element releases a stainless steel coil spring,
driving a needle into the end of the gas cylinder, puncturing it and allowing
the gas to fill the LP. The LP should fully inflate within five seconds.
water-sensitive element. The element releases a stainless steel coil spring,
driving a needle into the end of the gas cylinder, puncturing it and allowing
the gas to fill the LP. The LP should fully inflate within five seconds.
Special Considerations
Auto-inflation of the MD3196 LP could create a risk of damage under the
following circumstances:
•
following circumstances:
•
Double inflation – CO
2
cylinder inflation after full oral inflation.
•
Inflation while stored in a tight space.
•
Inflation while in an awkward place or position.
Compact Tactical LP
Owners Manual
4