Garmin 6208 Manuale Utente

Digital Selective Calling 

Note: The selection of a DSC channel is limited to those channels that are available in all 

frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. 

If you select a different channel, the chartplotter uses that channel for subsequent calls until you call 

using another channel.
1.  From the Home screen, select 

 > 

.

2.  Select a vessel or a station to call.
3.  Select 

 > 

 > 

.

4.  Select a channel.

Note: When initiating a call from the chartplotter, if the radio does not have an MMSI number 

programmed, the radio will not receive call information.
1.  From the Home screen, select 

 > 

.

2.  Select a vessel or a station to call.
3.  Select 

 > 

 > 

.

The chartplotter sends information about the call to the radio.

4.  On your Garmin VHF radio, select 

.

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you 

can use the chartplotter interface to set up an individual routine call to an AIS target. Before you start  

the call, you can select a DSC channel other than the default channel, channel 72 (

).

1.  From the Home screen, select 

.

2.  Select a chart or a 3D chart view.
3.  Complete an action:

For the GPSMAP 6000 series, use the Rocker to select an AIS target  .
For the GPSMAP 7000 series, touch an AIS target  .

4.  Select 

 > 

 > 

.

The chartplotter sends information about the call to the radio.

5.  On your Garmin VHF radio, select 

.

•
•