Garmin 6208 Manuale Utente

Appendix 

The GPSMAP 7000 series chartplotter touchscreen does not normally require calibration. However, 

if the buttons do not seem to be responding properly, use the following process to calibrate the 

screen.
1.  While the chartplotter is turned off, press the   

 key.

The Warning screen appears.

2.  Touch anywhere on the black portion of the screen for approximately 15 seconds until the 

calibration screen appears.

3.  Follow the instructions on the screen until “Calibration is complete” appears.
4.  Touch 

.

Note: To capture screenshots using a GPSMAP 7012, 7212, 7015 or 7515, you must use the 

Garmin RF Wireless Remote Control.
You can capture as a bitmap (.BMP) file a screenshot of any screen shown on your chartplotter, and 

transfer the file to your computer.

1.  Insert a memory card into the SD card slot on the front of the chartplotter. 
2.  Select 

 > 

 > 

> 

 > 

.

3.  Go to a screen you want to capture.
4.  Take a screenshot:

For the GPSMAP 6000 series, press the 

 key for at least six seconds.

For the GPSMAP 7000 series, press the 

 button on the Garmin RF Wireless Remote 

Control for at least six seconds.

The Screenshot Taken window appears.

5.  Select 

.

1.  Remove the memory card from the chartplotter and insert it into an SD card reader that is 

attached to a computer.

2.  From Windows Explorer, open the Garmin\scrn folder on the memory card.
3.  Copy a .BMP file from the card and paste it to any location on the computer.

You can view the relative position of GPS satellites in the sky.

From the Home screen, select 

 > 

 > 

.

See “Viewing System Information” (

).

•
•