High End Systems 2.0.0-EN Manuale Utente
10.2.1
Supported CITP Media Server Clients
Hog 4OS v2.0.0 supports the following CITP Media server clients:
•
Arkaos MediaMaster
•
Coolux Pandoras Box (software version 4.7 or greater)
•
Green Hippo Hippotizer (software version 3.2.1 or greater)
•
High End Systems Axon (software version 2.1.2 or greater)
•
High End Systems DL.2 (software version 2.1.2 or greater)
•
High End Systems DL.3 (software version 2.1.2 or greater)
•
High End Systems DLV (software version 2.1.1 or greater)
•
PRG Mbox Studio & Mbox Extreme (software version 3.6.1 or greater)
10.2.2
Configuring DP8000 for CITP Discovery
In order for the console to properly discover CITP enabled fixtures on a DP8000's FixtureNet
network, the FixtureNet adapter for the DP8000 must be properly configured:
network, the FixtureNet adapter for the DP8000 must be properly configured:
1.
Open the node settings window for the DP8000 that is connected via FixtureNet
to the CITP enable fixtures
to the CITP enable fixtures
2.
Select the FixtureNet tab of the node settings window
3.
Ensure that the IP address and subnet settings are appropriate for the network
environment in which the CITP discovered fixtures are connected. This is
similar to configuring the FixtureNet adapter for Art-Net and sACN output.
To better ensure connectivity it is recommended that the IP address assigned
to the FixtureNet adapter be within in the same sub-network as the CITP fix-
tures it is receving preview thumbnails from.
environment in which the CITP discovered fixtures are connected. This is
similar to configuring the FixtureNet adapter for Art-Net and sACN output.
To better ensure connectivity it is recommended that the IP address assigned
to the FixtureNet adapter be within in the same sub-network as the CITP fix-
tures it is receving preview thumbnails from.
10.2.3
Patching fixtures to CITP discovered fixtures
Once a fixture is scheduled into the patch window and patched to a DMX output, the fixture can
then be patched to a CITP fixture has been discovered on the FixtureNet network of any active
DP8000 connected to the console. Follow these steps to patch a fixutre to a CITP discovered
fixture:
then be patched to a CITP fixture has been discovered on the FixtureNet network of any active
DP8000 connected to the console. Follow these steps to patch a fixutre to a CITP discovered
fixture:
1.
Open the patch window
2.
Select the fixture(s) you wish to associate with a CITP fixture in the rig (if
your show file contains
your show file contains
3.
Press the "patch media" button at the top of the patch window
4.
Select the IP address of a discovered CITP fixture from the media patch win-
dow
dow
5.
Press okay. You will now see the IP address of the CITP fixture in the patch
window listed for the fixtures you selected in step 2. This will now associate
window listed for the fixtures you selected in step 2. This will now associate
173
High End Systems
Section 10: Media Picker