Hans Grohe 35807801 Manuale Utente

4

Loosen the compression fitting on the end of the flexible 

handspray hose.  Slide it onto the end of the handspray 

supply hose.

While holding the hose still with a 1 mm wrench, tighten the 

nut with a 17 mm wrench.  

Do noT aLLoW THe HoSe To TWIST.  IF THe HoSe 

TWISTS, THe FLoW FRoM THe SPRayHeaD May Be 

ReDuceD.

Proper installation of the hose weight will insure that the handspray hose retracts smoothly.

on the handshower side of the hose, use a ruler to measure 15” down from the body of the 

faucet.  Install the hose weight at this point.  

Pull out on the handspray and guide it back into the faucet.  It should move easily and 

retract smoothly.  Reposition the hose weight if necessary.

Connect the supplies:

connect the hot and cold supply hoses to the 

supplies with 3/8” compression fittings (not 

included).  Tighten them wrench tight.  

use two wrenches, as shown in the diagram.  Do 

not allow the hot and cold supply hoses to twist.