England's Stove Works 55-SHPEP Manuale Utente

Page | 22 
 

 

Thermostat Operation Details 

•  The 25-EP was designed to operate equally well in both manual and 

thermostat mode.  While using the control board for heating control gives 
the user control over the heat output of the stove, the thermostat allows the 
stove to “start-up” and “shutdown” independently which will help maintain 
your house at a more constant temperature and save pellet fuel. 

•  The 25-EP can be connected to either a wall thermostat (Part # GU-1E30-

914) or wireless remote thermostat (Part # AC-3001).  Although either 
thermostat will operate the stove properly, we highly recommend the 
wireless thermostat for the convenience of starting your pellet stove from 
anywhere in the house. 

•  During thermostatic operation, the stove will burn at whatever heat range 

and blower speed the control board has been set to. 

•  When the call for heat is gone (i.e. the room is up to temperature), the stove 

will enter the thermostatic shutdown sequence.   

•  If, during the shutdown period, the call for heat returns, the stove will 

complete the shutdown cycle before relighting. 

•  Remember to locate the thermostat near the stove in a central location; 

putting the thermostat in a distant room can cause the stove to overheat the 
room it’s located in because the thermostat will only sense the temperature 
of the room in which it is installed. 

•  Although all heat range and blower speed settings are available in thermostat 

mode, the two settings specifically designed for thermostat mode are heat 
ranges 3 and 8. 

o

  Heat range 3 is intended for thermostat operation under normal 

operating conditions. 

o

  Heat range 8 is ideal for thermostat operation in large or poorly 

insulated homes.