Philips BTB2462/05 Manuale Utente
8
EN
Set clock
1
In power-on mode, press and hold
CLOCK on the remote control for 3
seconds.
»
The [24H] or [12H] hour format is
displayed.
2
Press / to select the [24H] or
[12H] hour format.
3
Press CLOCK to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press / to select hour and press
CLOCKto confirm.
»
The minute digits are displayed and
begin to blink.
5
Press / to select minute and press
CLOCK to confirm.
»
[SYNC ON] is displayed on the LCD
screen.
6
Press / to select whether to
synchronize the system clock with an
RDS radio station or a DAB+ station
that transmits time signals, and then press
CLOCK to confirm.
Note
•
If no button is pressed in 10 seconds, the system exits
clock setting mode automatically.
Tip
•
You can press CLOCK to view clock information in
power-on mode.
Turn on
• Press .
»
The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
»
The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
• Press and hold for more than 3 seconds.
»
The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
• Press and hold for more than 3 seconds.