Philips LFF6020W/GBB Manuale Utente

- 29 -

This parameter allows you to make your network secure 
by setting the encryption method to use in your WLAN 
network.

1 Type in  , select the menu SETUP using the keys 

 or   and confirm with OK.

2 Select WLAN using the keys   or   and confirm 

with OK.

3 Select PARAMETERS using the keys   or   and 

confirm with OK.

4 Select SECURITY using the keys   or   and 

confirm with OK.

5 Choose WEP, WPA or OFF and confirm with OK.

- If you choose WEP, enter a password:

 

- In a 64 bit security configuration, the password 
must contain five characters exactly.

 

- In a 128 bit security configuration, the 
password must contain 13 characters exactly.

- If you choose WPA, enter a WPA or WPA2 

password (min. 8 characters to 63 characters 
max.).

 

The password can contain alphanumerical 
characters - numbers and letters - and any other 
symbol available on the keypad. The only 
invalid character is "

€

" (euro currency sign).

6 Exit this menu by pressing the 

 

key

.

The machine name allows you to identify your machine on 
the network via a PC (for example with the name "PRINT-
NETWORK-1").

1 Type in  , select the menu SETUP using the keys 

 or   and confirm with OK.

2 Select WLAN using the keys   or   and confirm 

with OK.

3 Select PARAMETERS using the keys   or   and 

confirm with OK.

4 Select HOSTNAME using the keys   or   and 

confirm with OK.

5 Type in the desired name (15 characters 

maximum) and confirm with OK.

6 Exit this menu by pressing the 

 

key

.

Once your connection has been set up, you must install 
the network printer driver on your PC so that you can print 
your documents. 

 

Refer to the paragraph Software installation, page 34.

An example of how to configure an Ad-hoc network 
without security protection using the following 
parameters:

• network name: "house"
• radio type: "ad-hoc"
• channel: "1"
• PC’s IP address: "169.254.0.1"
• PC’s subnetwork mask: "255.255.0.0"
• PC’s gateway: "0.0.0.0"
• IP address of the multifunction machine: "169.254.0.2"
• subnetwork mask of the multifunction machine: 

"255.255.0.0"

• multifunction machine’s gateway: "0.0.0.0"

1 Plug the WLAN USB key into the USB connector of 

the multifunction machine.

2 Type in  , select the menu SETUP using the keys 

 or   and confirm with OK.

3 Select WLAN using the keys   or   and confirm 

with OK.

4 Select CONFIG. ASS. using the keys   or   and 

confirm with OK.

5 Select NEW NETWORK using the keys   or   

and confirm with OK.

6 SSID appears on the screen, enter "house" using 

the numerical keypad and confirm with OK.

7 Select the mode AD-HOC MODE and confirm 

with OK.

8 Enter "1" in the field CHANNEL and confirm 

with OK.

9 Select OFF and confirm with OK.
10 Select IP CONF.: MANU and confirm with OK.
11 Enter "169.254.0.2" in the field IP ADDRESS and 

confirm with OK.

12 Enter "255.255.0.0" in the field SUBNET MASK 

and confirm with OK.

13 Enter "0.0.0.0" in the field GATEWAY and confirm 

with OK.

14 At the end of this process, you return to the main 

menu of ASS. CONFIG.

15 Exit this menu by pressing the 

 

key

.

Once the network has been set up, the LED of the WLAN 
USB key should be on.

You must now set up the PC.