Philips LFF6020W/GBB Manuale Utente

- 30 -

For this section, refer to the instructions supplied by the 
manufacturer of the WLAN USB key to help you to find 
and join the "house" network.

1 You may need to install the software for the WLAN 

USB key on the PC, if this has not already been 
done. 

2 Plug WLAN USB key into a USB port on the PC.
3 Use the software of the WLAN USB key to detect 

the network.

4 Join the network "house" once this has been 

detected.

5 Now set up the WLAN network connection of your 

PC.

 

To do this, you must configure the element 
Protocol Internet (TCP/IP) for the WLAN 
connection that has been created. If this element is 
set up in such a way as to obtain an IP address 
automatically, you must change it to manual mode 
to set up the TCP/IP address ("169.254.0.1" in our 
example), the subnet mask ("255.255.0.0" in our 
example) and the default gateway ("0.0.0.0" in our 
example).

6 Enter OK.