Acronis Backup & Recovery 10 Adv WS TIDLBPDES Manuale Utente
Codici prodotto
TIDLBPDES
Any running task can put itself into the Need interaction state when it needs human interaction
such as changing media or ignoring a read error. The next state may be Stopping (if the user
chooses to stop the task) or Running (on selecting Ignore/Retry or another action, such as
Reboot, that can put the task to the Running state.)
such as changing media or ignoring a read error. The next state may be Stopping (if the user
chooses to stop the task) or Running (on selecting Ignore/Retry or another action, such as
Reboot, that can put the task to the Running state.)
Stopping
The user can stop a running task or a task that needs interaction. The task changes to the
Stopping state and then to the Idle state. A waiting task can also be stopped. In this case, since
the task is not running, "stop" means removing it from the queue .
Stopping state and then to the Idle state. A waiting task can also be stopped. In this case, since
the task is not running, "stop" means removing it from the queue .
Task state diagram
Task statuses
A task can have one of the following statuses: Error; Warning; OK.
A task status is derived from the result of the last run of the task.
Status
How it is determined
How to handle
1
Error
Last result is "Failed"
Identify the failed task -> Check the task log to find out the
reason of the failure, then do one or more of the following:
reason of the failure, then do one or more of the following:
•
Remove the reason of the failure -> [optionally] Start the
failed task manually
•
Edit the failed task to prevent its future failure
•
Edit the local plan to prevent its future failure in case a
local plan has failed
182
Copyright © Acronis, Inc., 2000-2009