ATTO Technology H308 Guida Utente

6

Insert the ATTO ExpressSAS host adapter into 
any open 2.0/1.2 PCI Express expansion slot. If 
you have questions about how to install an 
expansion card in your system, consult your 
computer’s documentation. 

7

Close the case on the computer and power it 
up.

8

Installed drivers are loaded.
For Windows 2000, XP and Server 2003
•  Windows detects your ExpressSAS Adapter 

and the 

Found New Hardware wizard 

appears. Proceed through the wizard with 
the default settings for each adapter 

channel. Insert the ExpressSAS installation 
disk when prompted.

•  After adapter installation is complete, the 

Found New Hardware wizard shows an 
ATTO Phantom Device for each channel. 
Proceed through the wizard with default 
settings to complete the installation.

For Windows Vista and Server 2008
•  Windows detects your adapter and 

automatically installs the required drivers.

If drivers do not load, refer to 

Install Drivers

 on 

page 5 and 

 on page 21.

9

Turn off power to the computer.

10 Continue to 

At shipping, the ExpressSAS R348 has an 8x internal 
port configuration. You may change the adapter to use 
a 4xinternal port and 4x external port configuration. 
1

Power on your computer.

2

Launch the ATTO Configuration Tool from the 
Installation CD. For Configuration Tool 
instructions, refer to the ATTO Utilities 
Installation and Operation Manual, also on the 
Installation CD.

3

From the left hand panel 

Device Listing, 

expand all the elements in the 

hosts tree. 

4

Find the ExpressSAS adapter and click on the 
Channel 1 entry in the tree.

5

Change the 

Port Configuration from 8 

Internal to 4 Intrn, 4 Extrn.

6

Click on 

Commit.

7

Exit the Configuration Tool application.

8

Power down the computer and unplug the 
computer from all power sources.

9

Continue to